#TREX HIDDEN FASTENERS ON STAIRS HOW TO#

It’s important to drill the holes one at a time to remove any debris that will cause the pieces to separate and prevent a clean, flush, tight connection. Take a screw and push it through the holes to clear any remaining debris. Keep a firm grip when drilling both pieces to prevent them from shifting out of place.

Now bring the pieces together and drill a hole, following the original, into the larger portion of the main board. With a small drill bit (to match the screws) drill a hole at an angle of 15 to 20 degrees, pointing the hole into the larger deck pieces. Take care to cut the pieces to exact matching lengths to create a flush, symmetrical appearance.īefore connecting the four pieces, drill a small hole for the screws. Next, cut two triangle pieces with a 3/16th surface on the top corner. When both pieces are placed together, there should be a triangle-shaped notch in the middle, on both ends. The pieces should be cut so the result is one length shorter than the other. Cut the pieces at a 45-degree angle on each side. Note: Throughout the process, check the video from Gray Daley for visual demonstrations.įirst, you need to cut two deck pieces to the exact length. You’ll also need standard safety equipment, including safety glasses. To start the process, you first need an impact driver, a drill (preferably corded), screws made for cap composite decking material, a miter saw, and a tape measure.

#TREX HIDDEN FASTENERS ON STAIRS HOW TO#

Step by Step: How to Build a Better Stair Tread With this technique, deck stairs made from composite material can hide their cut edges and maintain an elegant appeal that shows pride in craftsmanship. This problem can be solved using the “picture framing” method.

Trex hidden fasteners on stairs